ADT® Authorized Dealer Serving Jonesboro & Northeast Arkansas
close up of a lady adjusting the security panel
March 01, 2022

How To Reset Your Jonesboro Home System

One perk of getting your home security set up by trained experts is that you rarely need to worry about it. Even so, there will likely be a few instances where you need to reset your alarms in Jonesboro. If you use a smart command panel, a reset usually requires just a few minor taps of the touchscreen following common events like false alarms and battery changes.

Consult Your Owner’s Manual Before Resetting Your Alarm

Here’s a simple yet valuable tip before you try to reset your Jonesboro home security system, read your instruction manual ahead of time. You wouldn’t want to compromise your property’s defense because you hit something incorrectly. Also, the process might change if you moved from a number pad to a digital command hub. And if you’re struggling to reset your system, don't be reluctant to call the professionals.

Resetting Your Jonesboro Home Security System Because Of A False Alarm

Generally, a false alarm happens because of an accidentally tripped sensor. You are able to utilize the central hub or open your ADT security app and touch the shield option and enter your credentials to switch off the alarms when this occurs. You might get a call from your 24-hour monitoring specialists, but simply inform them that you experienced a false alarm.

Resetting Your Alarm When Experiencing A Power Outage In Jonesboro

If power is lost from high winds or other factors, you could begin hearing a steady beep from your control panel. This lets you know that your home’s defense is using the secondary power source. To reset your unit and stop the steady beeps, you should take steps to disarm and rearm your security.

Keep in mind, if your power outage lasts for an extended time, you might need a full reset of your system. Follow the instructions in the manual -- usually by submitting your PIN number and pressing the off button two times -- and you should be back to normal. You may still hear the auxiliary power beeping, as it may not stop until the battery charges entirely. Call your home security specialists if you are still having issues with your ADT equipment at least 20 hours after your power is back on.

When You Need To Reset Your Home Security System After Replacing A Battery

There will be infrequent times when you will have to change a battery powering one of your security devices. When this needs to be done, you should switch your alarm system to Test Mode so you don't trigger an accidental alarm. After the battery is replaced, move the alarm out of Test Mode and resume normal operations. If the system is unable to notice the component or the battery light stays on, you could require a full reset of your security system.

Resetting Your Jonesboro Security System When Adding Or Removing A Code

Removing or adding users can be accomplished on your ADT Command interface and your ADT mobile app. You should never need a reset of your alarm after adding or removing users. With that being said, if you relocate to a new home that already has an ADT security system, you should reach out to your security specialists at (870) 705-5022 to start a new contract. The technician will go on site to switch out outdated parts, install additional devices (as required), and reset the system for you.

A Well-Designed Security System Is Only A Call Away

Figuring out how to reset a home security system in Jonesboro can be a challenge if it doesn’t have understandable instructions and features. If the time has come to acquire your intuitive home security system, dial (870) 705-5022 or send in the form below. Our team is pleased to customize the right security system for your needs.